Product Categories
Mobile/Whatsapp:+86 13329942980
Email:sale@hydrstar.com Support:18171706755(WeChat, same number)
Factory address:Economic Development Zone, LuoTian County, Huanggang City, HuBei Prov., China 438000.
Office address: Room 701, Block 3, WeiLaiZhiGuang, Guanggu Avenue No.3 , Hongshan District, Wuhan, Hubei Pro., China430074
Annealed 316 stainless steel construction .Other special materials available . Working pressure up to 20000 psig. Working temperature ranges from-40°F to 250°F(-40°C to 120°C) . Designed for sour gas service .Meet requirements of NACE MR-0175. Special bleed port is set to prevent splash fluid from damaging operators .
Constructed from 316 Stainless Steel. Other special materials are available . Reduced wear due to the non-rotating stem design . The stem packing seal design ensures more reliable valve sealing. Working pressures up to 20,000 psig. Standard valves with glass-filled PTFE seals operate within a temperature range of - 100°F to 450°F (-73°C to 232 °C) . Alternative sealing materials are available, such as graphite packing.
Constructed from annealed 316 stainless steel; other special materials are available. Reduced wear due to the non-rotating stem design. Working Pressure: 20,000 psig. Standard valves with glass-filled PTFE seals have an operating temperature range of.100'F to 450°F (-73°C to 232°C). Alternative sealing materials are available, such asgraphite packing. Suitable for sour oil and gas service, meeting or exceeding the requirements of NACEMR0175 standard. It is commonly used as a qauge valve.
HYDR-STAR's coning tools are specially designed for medium pressure or high pressure tubes . They are applicable for processing an outward cone onto high pressure tubing end. Spring loaded design for better quality of the cone . The cutter of the tool is replaceable . If it is worn out, we can easily replace it with a new one .
HYDR-STAR’s threading tools are specially designed for high pressure tubes . They are applicable for processing a left-hand thread onto high pressure tubing ends . The threading tool consists of tool body, handles, screws, guide bushing and die . The die and the guide bushing can be removed and replaced. If the die or the guide bushing is worn out, we can easily replace it with a new one .
HYDR - STAR's reseating tools are specially designed for medium pressure or high pressure female connections . The tools can be used to repair the inner cones of medium pressure or high pressure female connections manually. The tool taper is 60 degrees . Spring loaded design for better quality of internal cone.
Tube is sold in a 10 ft unit Using stainless steel 316 cold material for excellent corrosion resistant. Working temperature ranges from -423°F (-252°C) to 1200°F (649°C).
AHP03M Series Single Drive Single Acting
Choice of 8 ratios. Flows to 14.81 L/min. Choice of wetted materials. Pressures to 31,900 psi(2199 bar). All Hydraulic fluids, water(plain or Dl), solvents, mild chemicals, liquefied gases.
AHP03M Series Single Drive Double Acting
Available in eight specifications; Maximum flow rate reaches 25 L/min; Sealing materials available upon request; Maximum output pressure can go up to 31,900 psi (220 MPa); Suitable for most hydraulic fluid media, including water, hydraulic oil, chemical solvents, emulsions, liquefied gases, and more.
AHP04 Series Single Drive Single Acting
Choice of 9 ratios. Flows to 7.01 L/min. Choice of wetted materials. Pressures to 15000 psi(1034bar) All Hydraulic fluids, water(plain or Dl), solvents, mild chemicals, liquefied gases.
AHP05 Series Single Drive Single Acting
Six specifications available; Maximum flow rate reaches 9.38 L/min; Sealing materials available upon request; maximum output pressure can go up to 14,500 psi (100 MPa); Suitable for most hydraulic fluid media, such as hydraulic oil, emulsions, and more.
AHP05 Series Single Drive Double Acting
Six specifications available; Maximum flow rate reaches 17.5 L/min; Sealing materials available upon request; Maximum output pressure can go up to 14,500 psi (100 MPa); Suitable for most hydraulic fluid media, such as hydraulic oil, emulsions, and more.
AHP06 Series Three-Drive Single-Acting Pump
Available in three specifications; Maximum flow rate reaches 0.41 L/min; Sealing materials available upon request; Maximum output pressure can go up to 100,000 psi (690 MPa); Suitable for most hydraulic fluid media, including water, hydraulic oil, chemical solvents, emulsions, liquefied gases, and more.
AHP06 Series Single Drive Double Acting
Choice of 8 ratios. Flows to 29.9 L/min. Choice of wetted materials. Pressures to 20,000 psi(1379 bar) Drive pressure 30 to 150 psi (2 to 10.3 bar)
AHP10 Series Double Drive Double Acting
Choice of 5 ratios. Flows to 31.5 L/min. Choice of wetted materials. Can be quickly repaired. Output pressures to 650,00 psi (4482 bar) Drive pressure 10 to 125 psi (2 to 8.6 bar). All Hydraulic fluids, water(plain or Dl), solvents, mild chemicals, liquefied gases.
Share our official website:
Contact us
Mobile/Whatsapp:+86 13329942980
Email:sale@hydrstar.com
HYDR-STAR Fluid Control Company Limited
Factory address:
Economic Development Zone, LuoTian County, Huanggang City, HuBei Prov., China 438000.
Office address: Room 701, Block 3, WeiLaiZhiGuang, Guanggu Avenue No.3 , Hongshan District, Wuhan, Hubei Prov., China430074
Follow us
Powered by www.300.cn This site supports bidirectional access via IPv4 / IPv6
WhatsApp：8613329942980
E-mail：sale@hydrstar.com
Technical Support：+8618171706755
Business Consulting：+86 13329942980