Product Categories
Mobile/Whatsapp:+86 13329942980
Email:sale@hydrstar.com Support:18171706755(WeChat, same number)
Factory address:Economic Development Zone, LuoTian County, Huanggang City, HuBei Prov., China 438000.
Office address: Room 701, Block 3, WeiLaiZhiGuang, Guanggu Avenue No.3 , Hongshan District, Wuhan, Hubei Pro., China430074
316 stainless steel construction. Large CV factor assures fast system response. Small operating noise. Type to NACE MR-0175 available. Standard Buna N seals,other seals available.
316 stainless steel construction ensures the valve offers excellent corrosion resistance. 316 stainless steel construction makes the valve has good corrosion resistance. Main valve metal to metal seal. Maximum inlet pressure:10000 psig(689 bar).
This pump is a plunger pump driven by an electric motor, and we recommend using it with an electric motor. These pumps are ideal for wellhead control panel systems and as power units for high-torque service tools. The pump is designed to handle hydraulic oil as its working medium and must be installed at a lower position than the oil tank. Before starting the pump, be sure to bleed all air out of the pump chamber.
This pump is a plunger pump that requires motor-driven operation and is recommended for use with an electric motor. Plunger pumps are ideal for high-pressure application tools such as wellhead control panel systems and high-torque power packs.
AHP03 Series Single Drive Single Acting
Choice of 9 ratios. Flows to 8.3 L/min. Choice of wetted materials. Pressures to 25,000 psi(1723 bar). All Hydraulic fluids, water(plain or Dl), solvents, mild chemicals, liquefied gases.
AHP06 Series Single Drive Single Acting
Available in 10 different specifications; Maximum flow rate reaches 19.9 L/min; Sealing materials available upon request; Maximum output pressure can go up to 60,000 psi (413.8 MPa); Drive air pressure ranges from 30 to 150 psi (0.2 to 1.03 MPa); Suitable for most hydraulic fluid media, including water, hydraulic oil, chemical solvents, emulsions, liquefied gases, and more.
AHP06 Series Double Drive Single Acting
Choice of 9 ratios. Flows to 19.9 L/min. Choice of wetted materials. Pressures to 75,000 psi(5171 bar)Drive pressure 30 to 150 psi (2 to 10.3 bar)
AHP06 Series Double Drive Double Acting
Choice of 4 ratios. Flows to 8.6 L/min. Choice of wetted materials. Pressures to 50,000 psi(3448 bar)Drive pressure 30 to 150 psi (2 to 10.3 bar).
AHP06 Series Long Stroke Single Drive Double Acting
Five specifications available; Maximum flow rate up to 132 L/min; sealing materials optional; Maximum output pressure可达 10,000 psi (69 MPa); Drive air pressure range: 30–125 psi (0.2–0.86 MPa); Suitable for most hydraulic fluid media, including water, hydraulic oil, chemical solvents, emulsions, liquefied gases, and more.
AHP10 Series Single Drive Double Acting
Choice of 5 ratios. Flows to 45.5 L/min. Choice of wetted materials. Can be quickly repaired. Output pressures to 325,00 psi (2241 bar)Drive pressure 30 to 125 psi (2 to 8.6 bar). All Hydraulic fluids, water(plain or Dl), solvents, mild chemicals, liquefied gases.
Technical Specifications of the 100 Series Liquid-Phase Gas Booster
The HYDR-STAR liquid-driven gas booster is a hydraulically powered gas pressurization unit characterized by its high boosting pressure and substantial gas flow output. It is designed to meet the demands of high-flow, high-temperature applications across a wide range of industrial uses. With a maximum hydraulic drive pressure of up to 4000 psi, it can generate output pressures exceeding 20,000 psi.
Technical Specifications for the 150 Series Liquid-Phase Gas Booster
The HYDR-STAR liquid-driven gas booster is a hydraulically powered gas pressurization unit characterized by its high boosting pressure and substantial gas flow output. It is designed to meet the demands of high-flow, high-temperature applications across a wide range of industrial uses. With a maximum hydraulic drive pressure of up to 4000 psi, it can generate output pressures exceeding 20,000 psi.
The maximum cycle rate is 30 cycles per minute, the maximum drive hydraulic pressure is 210 bar, and the drive cylinder has a diameter of 80 mm with a stroke of 127 mm. For more detailed technical specifications, please contact HYDR-STAR.
The maximum cycle rate is 30 cycles per minute, the maximum drive hydraulic pressure is 210 bar, and the drive cylinder has a diameter of 80 mm with a stroke of 127 mm. For more detailed technical specifications, please contact HYDR-STAR.
The maximum cycle rate is 30 cycles per minute, the maximum drive hydraulic pressure is 210 bar, and the drive cylinder has a diameter of 80 mm with a stroke of 127 mm. For more detailed technical specifications, please contact HYDR-STAR.
Share our official website:
Contact us
Mobile/Whatsapp:+86 13329942980
Email:sale@hydrstar.com
HYDR-STAR Fluid Control Company Limited
Factory address:
Economic Development Zone, LuoTian County, Huanggang City, HuBei Prov., China 438000.
Office address: Room 701, Block 3, WeiLaiZhiGuang, Guanggu Avenue No.3 , Hongshan District, Wuhan, Hubei Prov., China430074
Follow us
Powered by www.300.cn This site supports bidirectional access via IPv4 / IPv6
WhatsApp：8613329942980
E-mail：sale@hydrstar.com
Technical Support：+8618171706755
Business Consulting：+86 13329942980